Top rated - Amateur Radio |
|

Handling the Vibroplex Paddle2 views     (1 votes)
|
|

Moonlight and Clouds4 viewsThis is also one of my favorite shots of the trip. Exposure was 20 seconds on the DSC-W1. I suppose the distant headlights may be in San Juan Capistrano. The city lights towards the left is probably San Clemente (my hometown).     (1 votes)
|
|

Santiago Peak at Night1 viewsThis photo was taken facing away from our campsite. The light on the ground was from our lantern. Exposure on the DSC-W1 was 30 seconds.     (1 votes)
|
|

Station line-up and microphones1 viewsI just started using the Shure 444 desk mic. Sounds great to me!     (1 votes)
|
|
Most viewed - Amateur Radio |

Imax 2000 GPK57 viewsGround Plane kit installed on my IMAX 2000.
|
|

IMAX 2000 with Ground Plane Kit33 views
|
|

31 viewsInitially, the antenna was installed on a 5' pole. I've since replaced the 5' with a 10'. Due to building restrictions, I can't go higher.
|
|

IMAX 2000 Tuning Rings28 viewsSince the antenna was installed only 5' off the roof, the tuning rings were adjusted to compensate for SWR problems. After tuning (and raising the antenna to 10'), the SWR was a nice 1.2:1 at 28.4MHz.
|
|

Stinky Pipe24 viewsDo not inhale what comes from the vent pipe...
|
|
Random files - Amateur Radio |

Yaesu FT-101E 160-10 Meter AM/SSB at the San Clemente Base Station5 viewsThe original FT-101 series lasted for 8 years, beginning in late 1971 and lasting through 1979. This was the most popular and the most produced model by Yaesu in the FT-101 series. The FT-101 line at the San Clemente Base was purchased in 1976 by the original owner, a silent-key east-coast amateur operator. It is a "Late Model" version, with a serial # well above 20,501. I am the second owner of this line and am astounded at the care the original operator gave the equipment. There isn't a scratch on it! It has the Speech processor for SSB and the optional CW filter installed.
|
|

Icom IC-70001 viewsThis is such a sweet rig...
|
|

Faceplate removed...2 views
|
|

1 views
|
|

1 views
|
|

Rocker Box Electrical Short2 viewsOne of the jumpers was shorting on the copper shield.
|
|

1 views
|
|

Royce 6425 views
|
|

0 views
|
|

Realistic TRC-4571 views
|
|

1 views
|
|

1 views
|
|

2 views
|
|

1 views
|
|

Dit Dah0 views-.-. --.- -.-. --.- -.-. --.-!
|
|

2 views
|
|

1 views
|
|

4 viewsThe very back right-corner is where I wanted to start the North end of my dipole. Very cramped.
|
|

Tucker T-1000 viewsOne of several TVI filters I own. They don't help that much when running a few hundred watts off a hi-gain vertical.
|
|

Command Technologies Commander HF-25001 views
|
|

Step 2: Remove Paint & Primer1 viewsThe Dremel is perfect for this. Get down to the steel!
|
|

0 views
|
|

Drum Stand on the Rocks0 viewsA drum stand was used to hold the 1/2" PVC pipe. This assembly helped supported the ladder line.
|
|

0 views
|
|

1 views
|
|