Photo Gallery

Due to spam, registration has been disabled. Email redbaron057 at yahoo dot com for a username.
Home > _MAIN > Hobbies > Amateur Radio > Imax 2000 Installation

Last additions - Imax 2000 Installation
DSC05294.JPG
22 viewsJan 31, 2008
DSC05293.JPG
U-Bolts11 viewsThanks to Lowe's for the U-bolts. More importantly, thanks to DeNault's Hardware for the many additional cross beams!Jan 31, 2008
DSC05291.JPG
IMAX top section fades into distance24 viewsJan 31, 2008
DSC05290.JPG
Stinky Pipe24 viewsDo not inhale what comes from the vent pipe...Jan 31, 2008
DSC05288.JPG
IMAX 2000 Tuning Rings28 viewsSince the antenna was installed only 5' off the roof, the tuning rings were adjusted to compensate for SWR problems. After tuning (and raising the antenna to 10'), the SWR was a nice 1.2:1 at 28.4MHz.Jan 31, 2008
DSC05286.JPG
Imax 2000 GPK57 viewsGround Plane kit installed on my IMAX 2000.Jan 31, 2008
DSC05285.JPG
13 viewsJan 31, 2008
DSC05282.JPG
31 viewsInitially, the antenna was installed on a 5' pole. I've since replaced the 5' with a 10'. Due to building restrictions, I can't go higher.Jan 31, 2008
DSC05283.JPG
IMAX 2000 with Ground Plane Kit33 viewsJan 31, 2008
 
9 files on 1 page(s)