| Last additions - Mobile Grounding |
Hood ground strap2 viewsI installed two ground straps for the hood, as the engine compartment has the highest concentration of electrical noise.Mar 11, 2009
|
|
Engine Block Grounding1 viewsThe engine was already grounded. To improve the existing connection, I removed the bolt, ground away paint & primer, and added compound for protection and conductivity.Mar 11, 2009
|
|
Passenger-side ground strap close-up2 viewsMar 11, 2009
|
|
Driver-side ground strap1 viewsMar 11, 2009
|
|
Ground Strap on the rear hatch1 viewsBenefits achieved after ground strapping all doors: voltage drop decreased, power output increased by 2-3%, and most noticeably - cross chatter between my HF and VHF radios completely disappeared.Mar 11, 2009
|
|
Grounding Strap2 viewsMake sure you plan for extra flexibility. Measure twice, cut ONCE.Mar 11, 2009
|
|
NoAlox Anti-oxidant compound1 viewsThis is great stuff to protect against dis-similar metals, rust & oxidization. Thank goodness it was in Spanish, too.Mar 11, 2009
|
|
Tools & Parts1 viewsStainless steel self-drilling screws, stainless washers, stainless, 1/2" braid, NoAlox Anti-oxidant compound, wire brush, dremel tool with grinding wheel. ALL purchasable at Lowe's (except the braid).Mar 11, 2009
|
|
Step 1: Drill Pilot Hole1 viewsMar 11, 2009
|
|
Step 4: Attach Hardware1 viewsOnly use STAINLESS hardware. It's more expensive, but well worth it.Mar 11, 2009
|
|
Step 3: Apply Anti-Oxidant Compound1 viewsUse NoAlox or other anti-oxidant, conductive compound.Mar 11, 2009
|
|
Step 2: Remove Paint & Primer1 viewsThe Dremel is perfect for this. Get down to the steel!Mar 11, 2009
|
|
|
|
|
|
|
